İZOKES
Tar asphalt and solvent free, paintable, is a long-lasting insulation material resistant to the sun’s rays.
SPECIFICATIONS:
It contains an elastomeric copolymer. It adheres very well to the applied surface. It does not crack due to elasticity. It can be diluted with water and cleaned.
PRACTICE:
The oil, dirt, dust and loose layers on the surfaces to be applied should be cleaned. First of all, İZOKES, diluted with 25% water, is applied as a coat of primer. The second and third layers are applied on this primer without diluting İZOKES. Each applied coat shall be applied within 48 hours after the application of the previous coat.In active cracks, IZOCES should be reinforced with fibrocam or braided fibers in areas where water is collected and waited. Apply İZOKES at +5 C and in dry weather. Be careful that the air is free of rain during the drying period of 5-6 hours after application. İZOKES should be protected against mechanical impacts and a protective layer should be constructed on the trips.
SURFACES TO BE APPLIED:
Roofing bases are an insulation material applied to basement walls and any kind of material that needs water transfer. For this reason İZOKES can be easily applied to plaster, gross concrete, ytong, asbestos cement slabs and floors. Iron and steel surfaces should astartan with the first Antipas.
CONSUMPTION:
Depending on the surface to be applied, on the 3rd layer in the vertical 1 m² per 0.8 kg; Approximately 1 or 1.2 kg is applied to 3 m² 1 m² per layer.