WALL (SILICONE)

Emulsion based and Silicone additive, Silky mat look. A dispersion paint is used on interior.

SPECIFICATIONS:
It does not crack, it sticks to the surface where it does not fade. Brush does not leave a trace. It is odorless, dry quickly. Very easy to apply with brush and roller. Because it is silicon, it has the covering power.

SURFACES TO BE APPLIED:
Fine plaster, gypsum plaster, satin gypsum, ceilings, etc. Applicable to surfaces.

PRACTICE:
The surface is completely cleaned from oil, dirt and dust. Raw plastered, calcined or satin plaster finishes are insulated with ISOLAK (Acrylic or silicone primer).

In the old whitewashed a good place to do surface cleaning, playful places should be dug after. For dust should be washed with clean water at the surface.

The cracks are filled with İZODOL (Acrylic paste). Depending on the absorbency of the wall, one of the wall silicone products diluted between 15% and 20% is applied at least 2 times. Wait at least 3 hours between coats.

CONSUMPTION:
Depending on the surface in a single layer 10 m² / l.