WALL

Emulsion based mat look. A dispersion paint is used on interior

SPECIFICATIONS:
It does not crack, it sticks to the surface where it does not fade. No brush marks left. It is odorless, dry quickly. Brush and applied very easy to roll. It has cover power.

PRACTICE:

The surface is completely cleaned from oil, dirt and dust. Raw plastered, calcined or satin plaster finishes are insulated with ISOLAK (Acrylic or silicone primer).

In the old whitewashed areas, a good surface cleaning should be done and the playgrounds should be scratched. Afterwards, the surface should be cleaned with clean water and dust should be removed from the surface.

The cracks are filled with İZODOL (Acrylic paste). According to the porosity of the wall of one of the product diluted wall between 15% and 20% is applied at least 2 times. Wait at least 3 hours between coats.

SURFACES TO BE APPLIED:
Fine plaster, gypsum plaster, satin gypsum, ceilings, etc. Applicable to surfaces.

CONSUMPTION:
Depending on the surface in a single layer 10 m² / l