İZOCOP

Crack, it fits with synthetic dyes.

SPECIFICATIONS:
Liquid is transparent. is one component, the state is ready to launch. 8 atm, is resistant to water pressure. Absolutely water-immiscible, solvent-based. It does not hurt to navigate on it. It does not transmit electricity. It penetrates into the pores of the surface to which it is poured. Since it is transparent, it does not disturb the appearance of the surface it is exposed to. Resistant to acids and alkalis.

PRACTICE:
Surfaces are applied with brush or roller by two layers. It is the substrate must be free from dust and moisture. İZOCOP is applied on bare concrete. If liquid insulation and similar materials are present on the surface, it is necessary to clean them. Cement, marble tobacco etc. on surfaces with wide cracks. The material is mixed with the paste to obtain the paste consistency and applied to these cracks. After that, IZOCOP is applied again to solve the problem.

Touch for 15-30 minutes depending on weather conditions, 24 hours for full drying

SURFACES TO BE APPLIED:
Terrace roofing is made of concrete, plaster, alum, tile, mosaic, brick, Ytong, wood and so on. On the surfaces; As direct or paint primer on external surfaces; Slippery but dry, cracked, faded, with bases on the surfaces and basement walls, on the bathroom floors and walls, in the isolation of the tiles and ceramic tiles, on the retaining walls, preventing chimney flows; It can be used as primer and impermeable material under ceramic.

CONSUMPTION:
1 kg, depending on the floor area of 3-5 m2 insulation is provided